Da

✏️ Editing: rfc3727.txt

Network Working Group                                            S. Legg
Request for Comments: 3727                           Adacel Technologies
Category: Standards Track                                  February 2004

ASN.1 Module Definition for the
                LDAP and X.500 Component Matching Rules

Status of this Memo

This document specifies an Internet standards track protocol for the
   Internet community, and requests discussion and suggestions for
   improvements.  Please refer to the current edition of the "Internet
   Official Protocol Standards" (STD 1) for the standardization state
   and status of this protocol.  Distribution of this memo is unlimited.

Abstract

This document updates the specification of the component matching
   rules for Lightweight Directory Access Protocol (LDAP) and X.500
   directories (RFC3687) by collecting the Abstract Syntax Notation One
   (ASN.1) definitions of the component matching rules into an
   appropriately identified ASN.1 module so that other specifications
   may reference the component matching rule definitions from within
   their own ASN.1 modules.

1.  Introduction

The structure or data type of data held in an attribute of a
   Lightweight Directory Access Protocol (LDAP) [LDAP] or X.500 [X500]
   directory is described by the attribute's syntax.  Attribute syntaxes
   range from simple data types, such as text string, integer, or
   boolean, to complex data types, for example, the syntaxes of the
   directory schema operational attributes.  RFC 3687 [CMR] defines a
   generic way of matching user selected components in a directory
   attribute value of any arbitrarily complex attribute syntax.

This document updates RFC 3687 by collecting the Abstract Syntax
   Notation One (ASN.1) [ASN1] definitions of RFC 3687 into an
   appropriately identified ASN.1 module so that other specifications
   may reference these definitions from within their own ASN.1 modules.

Legg                        Standards Track                     [Page 1]

RFC 3727             Module for Component Matching         February 2004

2.  Module Definition for Component Matching

ComponentMatching
       {iso(1) 2 36 79672281 xed(3) module(0) component-matching(4)}

--  Copyright (C) The Internet Society (2004).  This version of
   --  this ASN.1 module is part of RFC 3727; see the RFC itself
   --  for full legal notices.

DEFINITIONS
   EXPLICIT TAGS
   EXTENSIBILITY IMPLIED ::= BEGIN

IMPORTS
       MATCHING-RULE,
       RelativeDistinguishedName
           FROM InformationFramework
               {joint-iso-itu-t ds(5) module(1)
                   informationFramework(1) 4} ;

ComponentAssertion ::= SEQUENCE {
       component         ComponentReference (SIZE(1..MAX)) OPTIONAL,
       useDefaultValues  BOOLEAN DEFAULT TRUE,
       rule              MATCHING-RULE.&id,
       value             MATCHING-RULE.&AssertionType }

ComponentReference ::= UTF8String

ComponentFilter ::= CHOICE {
       item  [0] ComponentAssertion,
       and   [1] SEQUENCE OF ComponentFilter,
       or    [2] SEQUENCE OF ComponentFilter,
       not   [3] ComponentFilter }

componentFilterMatch MATCHING-RULE ::= {
       SYNTAX  ComponentFilter
       ID      { 1 2 36 79672281 1 13 2 } }

allComponentsMatch MATCHING-RULE ::= {
       ID      { 1 2 36 79672281 1 13 6 } }

directoryComponentsMatch MATCHING-RULE ::= {
       ID      { 1 2 36 79672281 1 13 7 } }

-- Additional Useful Matching Rules --

rdnMatch MATCHING-RULE ::= {

Legg                        Standards Track                     [Page 2]

RFC 3727             Module for Component Matching         February 2004

SYNTAX  RelativeDistinguishedName
       ID      { 1 2 36 79672281 1 13 3 } }

presentMatch MATCHING-RULE ::= {
       SYNTAX  NULL
       ID      { 1 2 36 79672281 1 13 5 } }

END

The InformationFramework ASN.1 module from which the MATCHING-RULE
   and RelativeDistinguishedName definitions are imported is defined in
   X.501 [X501].

The object identifiers used in this document have been assigned for
   use in specifying the component matching rules by Adacel
   Technologies, under an arc assigned to Adacel by Standards Australia.

3.  Security Considerations

This document collects together the ASN.1 definitions of the
   component matching rules into an ASN.1 module, but does not modify
   those definitions in any way.  See RFC 3687 [CMR] for the security
   considerations of using the component matching rules.

4.  References

4.1.  Normative References

[CMR]   Legg, S., "Lightweight Directory Access Protocol (LDAP) and
           X.500 Component Matching Rules", RFC 3687, February 2004.

[X501]  ITU-T Recommendation X.501 (1993) | ISO/IEC 9594-2:1994,
           Information Technology - Open Systems Interconnection - The
           Directory: Models

[ASN1]  ITU-T Recommendation X.680 (07/02) | ISO/IEC 8824-1:2002,
           Information technology - Abstract Syntax Notation One
           (ASN.1): Specification of basic notation

4.2.  Informative References

[LDAP]  Hodges, J. and R. Morgan, "Lightweight Directory Access
           Protocol (v3): Technical Specification", RFC 3377, September
           2002.

[X500]  ITU-T Recommendation X.500 (1993) | ISO/IEC 9594-1:1994,
           Information Technology - Open Systems Interconnection - The
           Directory: Overview of concepts, models and services

Legg                        Standards Track                     [Page 3]

RFC 3727             Module for Component Matching         February 2004

5.  Author's Address

Steven Legg
   Adacel Technologies Ltd.
   250 Bay Street
   Brighton, Victoria 3186
   AUSTRALIA

Phone: +61 3 8530 7710
   Fax:   +61 3 8530 7888
   EMail: steven.legg@adacel.com.au

Legg                        Standards Track                     [Page 4]

RFC 3727             Module for Component Matching         February 2004

6.  Full Copyright Statement

Copyright (C) The Internet Society (2004).  This document is subject
   to the rights, licenses and restrictions contained in BCP 78 and
   except as set forth therein, the authors retain all their rights.

This document and the information contained herein are provided on an
   "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE
   REPRESENTS OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY AND THE
   INTERNET ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR
   IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF
   THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED
   WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

Intellectual Property

The IETF takes no position regarding the validity or scope of any
   Intellectual Property Rights or other rights that might be claimed
   to pertain to the implementation or use of the technology
   described in this document or the extent to which any license
   under such rights might or might not be available; nor does it
   represent that it has made any independent effort to identify any
   such rights.  Information on the procedures with respect to
   rights in RFC documents can be found in BCP 78 and BCP 79.

Copies of IPR disclosures made to the IETF Secretariat and any
   assurances of licenses to be made available, or the result of an
   attempt made to obtain a general license or permission for the use
   of such proprietary rights by implementers or users of this
   specification can be obtained from the IETF on-line IPR repository
   at http://www.ietf.org/ipr.

The IETF invites any interested party to bring to its attention
   any copyrights, patents or patent applications, or other
   proprietary rights that may cover technology that may be required
   to implement this standard.  Please address the information to the
   IETF at ietf-ipr@ietf.org.

Acknowledgement

Funding for the RFC Editor function is currently provided by the
   Internet Society.

Legg                        Standards Track                     [Page 5]

📁 Sid Gifari File Manager